A smoke alarm reacts to smoke particles and gives you an earlier warning. A heat alarm waits for the room to reach roughly 55 to 60°C, when the fire is already well developed. Most homes are best served by

You should receive a certificate of testing and compliance from your licensed electrical contractor once they’ve worked on your electrical installation and connected it back to the supply. Queensland law requires it. The contractor is putting in writing that

Smoke alarm placement in homes across Queensland starts with the bedrooms. Each one needs its own alarm, and so does the hallway outside them. A storey with no bedrooms still gets one. They go on the ceiling wherever it

For smoke alarm placement in Queensland, start with the bedrooms. Every one needs a photoelectric smoke alarm, and so does the hallway outside them. A storey with no bedrooms still gets one. Heat alarms sit outside all of this.

Split system installation cost in Australia typically sits around $600 to $1,500 for installation alone, or $1,500 to $4,700 supplied and installed. Unit size sets the starting price. Pipe run, mounting height, access and electrical work decide where the

Power out after a storm? Look at your neighbours’ homes first. If they’re dark too, the fault is on the Energex network, so check the Outage Finder. If only your home is out, check your safety switch. If it